Installation Requirements

Board size and type

Kaptivo is designed to work on white or coated glass dry-erase boards up to 6’ x 4’ (1.8 m x 1.2 m). The product includes all required hardware to mount to drywall.
We sell a separate extension mount that will allow you to capture up to 8' x 5' (2.4 m x 1.5 m).

Glass-surface board

Kaptivo works best with glass-surface boards that have coatings on the back of the glass. If there is some distance to the wall and no coating you may see some ‘echoes’ in the Kaptivo images, particularly in the bottom corners. We do sell a mount that will clip onto a glass board. If you wish to use Kaptivo with a glass board, we recommend Clarus boards.

Location

You can use Kaptivo anywhere. Kaptivo ships with power plug adapters for the United States/Canada, United Kingdom, and Europe and supports 100-240V AC. All you need is AC power and a network connection.

Alternate Mounting options

Kaptivo ships ready to be mounted on any office wall. We have developed some alternative mounts including glass board clips, magnetic mounts, and suction mounts to support movable boards.  We also have 1-gang wall box adapter plates for the camera and control pad.  See our online store Accessories section, or please contact us if you have any particular requirements. 

Supported network types

Kaptivo Enterprise supports Ethernet connectivity, and Power over Ethernet (PoE).
If connected to a powered Ethernet port, the included AC power adapter is not needed.

Kaptivo Enterprise also supports 2.4GHz Wi-Fi networks.
5GHz networks will not appear on the list of available networks during Kaptivo configuration.